HomeHow toHow to Fix Hisense TV Not Turning on Issue?

How to Fix Hisense TV Not Turning on Issue?

Here is a detailed guide to help you fix the Hisense TV if it is not turning on. After a long boring day at work, when you get back home you would wish to unwind. You would do that by watching some favorite shows or movies on the TV. It becomes a huge letdown if the Hisense TV is not turning on.

fix  hisense tv

Let us know the possible reasons for this technical shortcoming. Also by learning the useful tips to fix the Hisense TV, you can get it to run again and enjoy your TV shows.

Common Reasons Why Hisense TV is Not Turning On?

For those who may not be tech enthusiasts, this section will help you in knowing the possible reasons why Hisense TV is not turning on.

The batteries on the remote control may have run out of juice. The TV set may not be receiving any input from the corresponding TV box. Among other reasons, the power cable of the TV may have some defect which is causing a loose connection to the power source.

On the other hand, if the power outlet on the wall is damaged, then you cannot connect the TV cable to the socket. This usually happens when the socket remains unused for years or there may be some issue in the wiring behind it. A damaged HDMI cable can also cause the Hisense TV not to boot up. The TV may be fine but without HDMI no sound or videos are going to play on the monitor.

Related | How to Cast on Hisense TV [all methods]

Best Tips to Fix Hisense TV Not Turning on

Here are the troubleshooting tips that you can implement to make the Hisense TV work if it has been staying unresponsive.

Power Cycle the TV

Let us begin with the simplest of all fixes. This is power cycling the TV.

powercycle the tv

  1. Unplug the TV from the power source.
  2. Let the TV remain unplugged for about a minute or two.
  3. Press the Power button on the TV for about half a minute.
  4. Now, connect the TV cable to the power source.
  5. Switch on the TV and it should now work.

Fix the HDMI Port/Cable

The HDMI cable may be connected loosely or has some other technical issues. Start by simply removing the HDMI cable and putting back it again.

hdmi ports

You may also connect the HDMI cable to the auxiliary HDMI port. Usually, there is more than one HDMI port on the TV. Additionally, consult with the TV technician to check if the HDMI cable needs a replacement. Use a different/new HDMI cable with the TV and the Hisense TV should turn on without any issues.

Change the Defective Power Outlet

The power outlet on the wall may have some loose connection or bad wiring. Ask for help from your electrician and fix the wall outlet. Once that is fixed, reconnect the power cable to the wall outlet and turn the TV on.

fix the power outlet

Check the Power Cable and Replace it if Necessary

Sometimes, the power cable may have some fault that may require fixing or replacement. Again, ask your electrician or contact the dealership to hire a dedicated TV technician to see what is wrong with the Hisense TV power cable.

Related | How to cast iPhone/iPad to Hisense Smart TV

Replace the Batteries on the Remote Control

After a long use for months, the batteries will run out. So, always have an extra pair of batteries handy. Replace the old ones with these new ones and check if it was the remote control all along causing the Hisense TV to not turn on.

change batteries on the remote control

The Remote Control Hardware May Have Some Issues

Did your Hisense Tv remote control ever fall on any hard surface? Then maybe the impact has caused the internal hardware of the remote control some sort of damage.

If you are not sure, take the remote control to the nearest TV repair shop or to the dealership from where you have brought your Hisense TV. Ask their technicians to take a look at the remote control and fix it if there is indeed any hardware issue with that.

Perform a Factory Reset 

A factory reset will get your TV’s settings back to the default settings. It will erase the WiFi network details which you have to set up again when the TV turns on.

factory reset firestick

  1. Press the Reset button on the back of your TV for about thirty seconds.
  2. Otherwise, you can press the Input and Volume down buttons. It will also factory reset the TV.
Related | How to reset Google Chromecast

The Hisense TV Unit may have Manufacturial Defect

The Hisense TV you have may have some defects right from the factory. If none of the other troubleshooting tips are working, then contact Hisense customer support. Otherwise, if you have bought it from any local dealer near you, contact them. They usually have repairpersons that can fix issues with the TV promptly.

If the Hisense TV model is still under warranty, then ask for a replacement. You can directly get to customer support for sending a query regarding the same. So, these are the troubleshooting tips by which you can fix the issue of Hisense TV not turning on. I hope you found the guide useful.

Swayam Prakash
Swayam Prakash
Swayam is a professional tech content creator with around 5000+ blog posts under his name on prominent tech websites. With knowledge of SEO & Digital Marketing, he creates consumer-tech-based content on all-things Android, iOS, and Windows OS.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Must Read

How To Cast

Subscribe

Select Newsletter Type

YOU MIGHT LIKE